4 Tips To Eliminate Molds NATURALLY.

Last week I helped my brother move into his new apartment.

After moving a piece of furniture, I made a horrible discovery ...

Mold stains on window sills. Yuck!

Mold is not good for your health.

Believe me, this is really one of those things you should avoid touching and breathing!

And no matter how hard I rubbed with a rag, that creaky mold wouldn't go away ...

How to remove mold WITHOUT chemicals. 4 100% natural grandmother's tips!

After doing a lot of research, I found 4 effective solutions to remove mold from your home naturally.

These are tea tree essential oil, white vinegar, hydrogen peroxide, and baking soda.

Don't worry, these tips are easy to do.

I can tell you today that these 3 natural granny mold removal tips, WITHOUT the use of chemicals, are super effective. Look :

1. TEA TREE ESSENTIAL OIL

Tea tree essential oil: an effective grandma's trick for fighting mold at home.

Ingredients

- 1 teaspoon of tea tree essential oil

- 250 ml of water

- glass spray bottle

How to do

1. Put the essential tea tree oil and water in the spray.

2. Shake well before each use.

3. Spray the mixture directly on the mold.

Note: if you do not have a spray bottle, you can also soak a cloth with this mixture and moisten the affected area.

4. Leave on for several hours or overnight to completely eliminate mold.

5. Thoroughly wipe the affected area to remove all traces of mold.

6. Spray the area again without wiping, to prevent mold from reappearing.

7. Make a final pass by wiping the area with the baking soda mixture (see below).

To discover : Essential Tea Tree Oil: 14 Uses You Should Know About.

2. WHITE VINEGAR

White vinegar is one of the best natural products to completely eliminate mold.

Ingredients

- White vinegar

- spray bottle

How to do

1. Using the spray bottle, spray the pure white vinegar directly on the molds.

2. Use an old cloth to rub and work the vinegar into the affected areas well.

3. To remove all mold, make a final pass with the baking soda mixture (see below).

To discover : 23 Magical Uses of White Vinegar Everyone Should Know.

3. OXYGENATED WATER

Hydrogen peroxide: an ultra-effective remedy for removing mold stains!

Ingredients

- 1 teaspoon of hydrogen peroxide

- 250 ml of water

- spray bottle

How to do

1. Mix the water and hydrogen peroxide in the spray bottle.

2. Spray on the affected area (you can also use a cloth soaked in this mixture).

3. Leave on for at least 10 minutes.

4. Make a second pass with the water / hydrogen peroxide mixture to remove all mold.

5. Make a final pass with the baking soda mixture (see below).

To discover : 29 Magical Uses of Oxygenated Water. Don't Miss # 23!

4. SODA BICARBONATE

With baking soda, you can say goodbye to traces of mold!

After using one of the 3 solutions above, make a final pass with this baking soda mixture.

Why ? Because bicarbonate is a product recognized for its very effective disinfectant properties against the reappearance of molds.

Ingredients

- ½ teaspoon of baking soda

- 250 ml of water

- spray bottle

How to do

1. Put the baking soda and water in the spray bottle.

2. Shake to mix well.

3. After removing mold with one of the 3 products above, spray the same area with this baking soda mixture.

4. Rub with an old cloth and then rinse with water.

Results

Tea tree oil, vinegar or hydrogen peroxide: there are several solutions to remove mold from your home.

And there you have it, you have now eliminated all mold naturally :-)

Easy, convenient and efficient, isn't it?

Tea tree essential oil, white vinegar or hydrogen peroxide, and a last pass with bicarbonate ...

After this double attack, I promise you that you are not ready to see mold again!

To prevent mold from reappearing a few weeks later, I advise you to use a dehumidifier, to reduce the humidity in the room in question.

If you don't want to buy one, you can also do it yourself by following this tip.

These tips work WITHOUT using bleach or a commercial product loaded with toxic substances.

So of course you can also get good results with bleach, but it's a far from natural product that I don't like to use ... unless it is really the only solution.

Why does it work?

Tea tree essential oil: tea tree essential oil kills mold the first time. Thanks to its powerful anti-fungal and anti-bacterial properties, it is particularly effective in eliminating mold. The only downside is that it costs more than vinegar or hydrogen peroxide.

White vinegar: white vinegar is as effective as tea tree essential oil, and much cheaper. It is a recognized antibacterial that can also kill mold. If you're not a fan of the scent, I recommend adding a few drops of your favorite essential oil. Several studies have shown that 5% pure vinegar kills 82% of molds.

Oxygenated water: Antifungal, antibacterial and antiviral, hydrogen peroxide is an excellent solution against mold. Hydrogen peroxide is effective because it releases oxygen, thereby breaking down molds through the oxidation process.

What are the dangers of mold?

We see more and more health problems related to mold.

The concern is that many people suffer from the symptoms of mold exposure, but never know it.

Indeed, many doctors are often unaware of the harmful effects that molds can have on health.

These symptoms can range from a simple runny nose, headache, rash, fatigue, or depression and memory problems to much more serious health problems, including respiratory or neurological problems. .

In addition, we know that exposure to molds is also linked to certain forms of cancer.

This is why it is so important to remove all traces of mold from your home as quickly as possible using one of these 4 100% natural grandma's tips.

Your turn...

Have you tried these grandma's tips for removing mold from the house? Tell us in the comments if it was effective. We can't wait to hear from you!

Do you like this trick ? Share it with your friends on Facebook.

Also to discover:

The Brilliant Tip for Removing Mold from Walls Without Bleach.

7 Tips For Removing All Mold From Home.


$config[zx-auto] not found$config[zx-overlay] not found